Load data for .30 PICRA + .308 | 181gr | RWS UNI Classic

Recommended Powder(s):

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 181gr \| RWS UNI Classic
Manufacturer SKU:	2145499
Bullet Weight:	181gr \| 11.7g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	<<locked>>
Caliber:	.30 PICRA load data
Case Length (l3):	1.291" \| 32.8mm
Cartridge Length (C.O.L.):	<<locked>>
Seated Depth:	<<locked>>
Shank Seated Depth:	<<locked>>
Case Capacity:	24.2 Grains of Water \| 1.57 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	40611 psi \| 2800 bar
LID:	LID_B5436_C311
Last updated:	2026-01-31
Recommended Twist Rate:	1:11 - 1:10

Load data for 42 loads in caliber .30 PICRA with .308 | 181gr | RWS UNI Classic bullet and 21 powder(s). The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	71%	35824	88%	**32	100%
ADI APS 450	<<locked>>	63%	36521	90%	**8	100%
Accurate 4100	<<locked>>	71%	36274	89%	**27	94%
[Accurate No. 11 FS]*	<<locked>>	80%	36085	89%	**43	88%
Alliant 2400	<<locked>>	68%	36376	90%	**30	96%
Alliant BLUE DOT	<<locked>>	71%	36361	90%	**01	100%
Alliant Herco	<<locked>>	71%	36463	90%	**66	100%
Baschieri & Pellagri 102 Pistol	<<locked>>	74%	36506	90%	**8	100%
Hodgdon H110	<<locked>>	75%	35926	88%	**53	91%
Hodgdon LilGun	<<locked>>	76%	35839	88%	**73	97%
Ramshot Enforcer	<<locked>>	68%	35694	88%	**34	97%
ReloadSwiss RS 14	<<locked>>	96%	25251	62%	**6	100%
ReloadSwiss RS 30	<<locked>>	92%	36129	89%	**86	94%
SNPE Vectan BA6 1/2 👍	<<locked>>	93%	36027	89%	**27	99%
SNPE Vectan BA7 1/2	<<locked>>	65%	36027	89%	**93	100%
Somchem S265	<<locked>>	83%	35853	88%	**11	90%
Vihtavuori 3N38	<<locked>>	68%	36463	90%	**78	100%
Vihtavuori N105	<<locked>>	70%	36521	90%	**81	100%
Vihtavuori N110	<<locked>>	85%	36100	89%	**43	97%
Vihtavuori N32C Tin Star	<<locked>>	78%	36361	90%	**2	100%
[Winchester 296]*	<<locked>>	75%	36376	90%	**73	88%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	60%	26934	66%	**24	100%
ADI APS 450	<<locked>>	61%	35099	86%	**5	100%
[Accurate 4100]*	<<locked>>	61%	25773	63%	**70	88%
[Accurate No. 11 FS]*	<<locked>>	69%	25034	62%	**76	80%
Alliant 2400	<<locked>>	61%	28660	71%	**19	93%
Alliant BLUE DOT	<<locked>>	61%	27282	67%	**76	98%
Alliant Herco	<<locked>>	61%	28442	70%	**4	100%
Baschieri & Pellagri 102 Pistol	<<locked>>	61%	26455	65%	**3	100%
[Hodgdon H110]*	<<locked>>	61%	22452	55%	**30	82%
[Hodgdon LilGun]*	<<locked>>	61%	20740	51%	**33	88%
Ramshot Enforcer	<<locked>>	61%	28253	70%	**25	94%
ReloadSwiss RS 14	<<locked>>	91%	23380	58%	**3	100%
[ReloadSwiss RS 30]*	<<locked>>	69%	18724	46%	**1	80%
[SNPE Vectan BA6 1/2]*	<<locked>>	61%	14649	36%	**0	84%
SNPE Vectan BA7 1/2	<<locked>>	61%	31299	77%	**40	100%
[Somchem S265]*	<<locked>>	66%	22147	55%	**4	81%
Vihtavuori 3N38	<<locked>>	61%	30110	74%	**96	100%
Vihtavuori N105	<<locked>>	61%	27340	67%	**70	100%
[Vihtavuori N110]*	<<locked>>	61%	17477	43%	**2	85%
Vihtavuori N32C Tin Star	<<locked>>	64%	27079	67%	**0	100%
[Winchester 296]*	<<locked>>	64%	24555	60%	**93	80%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data